How Does A Livewell Work On A Fishing Boat? (Question)

Livewells are tanks found on many fishing boats, deck boats, and pontoons that are used to keep bait and caught fish alive. It works by pumping fresh water from the lake you are boating on into the tank and then back out. This flow of water keeps the water fresh and oxygenated, allowing fish to breath properly.

How does livewell drain?

You can take a look at the livewell pump to see how it’s plumbed, but the livewell will probably drain out back through the pump when it’s out of the water. There could possibly be a valve inline to turn off flow through the drain/fill hose near the pump also, but you’ll see it when you look at the pump.

How does a livewell valve work?

While off plane, in the AUTO position, water enters the valve from both the livewell drain and the transom thru-hull. As the water level in the livewell increases so does the pressure on the transom check feature of the valve, reducing the ratio of fresh to recirculated water.

Can a livewell sink a boat?

As mentioned, livewells/baitwells are notorious for sinking boats. I tore mine out and permanently plugged them. Another thing is overloading the stern of a boat.

You might be interested:  How Much Is A Fishing License In Maryland? (Solution found)

How do you keep a livewell from filling?

Put expansion plugs in the holes on the outside of the boat for both the livewell fill or the pump as well as the livewell drain. Plug the holes from the outside and you will be good to go.

Can you use a bilge pump for a livewell?

A pump box is the best solution, so consider it during your livewell pump installation. Bilge pumps work here because they use the same motors and impellers as in centrifugal livewell pumps.

Can a livewell overflow?

If you turn the ProAir fill and the aerators on the overflow cannot keep up with that much water being pumped into the livewell and it will overflow. Nothing wrong with your livewell system except great pumps.

Where is the bilge pump?

Where are Bilge Pumps Located? Bilge pumps for boats should be mounted in the lowest part of your bilge. This is where it will be able to collect and pump the most water. If you have a secondary bilge pump it may be located a little higher up.

What keeps fish alive livewell?

8 Tips to Keep Your Fish Alive This Summer

  • Pump in water early in the day. Once your livewell is at the level you want, don’t pump in hot surface water.
  • Add Ice.
  • Add Bass Medics Rejuvenade.
  • Lid Vents.
  • Get a good net.
  • Fizz deep caught fish.
  • Weigh in.
  • Culling Clips.

Can you use a livewell as a cooler?

You can use any live well as a cooler. However, if yours is not insulated, the ice melts kinda fast, at least faster than a cooler. Check with your dealer or Crestliner directly to see if your live well liner is insulated, or at least surrounded with foam flotation.

You might be interested:  Fishing Planet How To Play With Friends? (Correct answer)

Does hydrogen peroxide keep fish alive?

It’s sort of like pouring water on sponge. Pour about one ounce of hydrogen peroxide in three gallons of water. The average live well may be 15 gallons, so pour five ounces of that, and it’ll make a reserve of oxygen in your water that will keep your fish alive and well.

Why is my livewell pump not working?

If you hear the pump running, it may be worn out, and unable to pump water because the impeller is too worn. Just to be sure, check and make sure there’s no crossover switch that’s on recirculate, instead of auto fill. There might also be some debris in the pump. They are easy to remove and check.

What does a recirculating livewell do?

Livewells can be operated to pump in fresh lake water or • recirculate livewell water. A recirculating system is es- sential to provide aeration when the boat is on plane, when the boat being trailered, or when you are controlling livewell temperature (see below).

Where is the livewell valve located?

This is the actual Drain valve located on the backside of your livewell wall, behind your boat’s fuel tank.

Leave a Reply

Your email address will not be published. Required fields are marked *